Canadian Roger Hatt has been making knives since 1994. When you get a Hatt knife, you get a beautiful bang for your buck.
Beautiful Damascus drop point folder with walrus ivory scales.
More information and to purchase the knife here
Canadian Roger Hatt has been making knives since 1994. When you get a Hatt knife, you get a beautiful bang for your buck.
Beautiful Damascus drop point folder with walrus ivory scales.
More information and to purchase the knife here
I have picked up a beautiful NiB Bear Ops Rancor Tactical Folder with Black Zytel Handle and Black Finished Blade.
The model is MC-110-B7-T
Marked on the blade is “First Production Run” making this knife a great addition to a collection.
Purchase Here
Jesse Paul Fox Jr, known by his middle name Paul, was a long-time member of the Knifemakers’ Guild and owner of Pioneer Woodcarving. As Fox’s friend and fellow maker Tim Britton noted on The Knife Network, “Paul may have been one of the most creative knifemakers of all time. He was perhaps best known for his electric-motor-driven folder and a series of very fancy knives that were a lot like sculpture. He won the W.W. Cronk Award at the Knifemakers’ Guild shows till they asked him to stop entering and let someone else win.
According to Britton, Fox had a great sense of humor. “Paul had a Chevy Suburban that he bought at a North Carolina State Surplus auction for $700,” Tim recalled. “It was ugly, yellow and very beat up. He took it to Hendricks Motors of NASCAR fame and had them put a full race motor in it. Damned thing would fly and Paul loved nothing better than challenging redneck racers and usually beating them. Guess you have figured out by now, that dude was a character!
“Paul was very much at home with locals—guys from the garage, bread-truck drivers, etc. He was one of a kind, like so many of us in knifemaking. I can still see Paul using the remote control boat to chase geese off his pond!”
– See more at: http://www.blademag.com/featured/knifemaker-paul-fox-dies#sthash.pOlrVOOm.dpuf
See his available knives here
I’ve added 3 of Cody Wescott knives to the website.
Cody Wescott of Las Cruces, New Mexico sold his first knife in 1982 and is a full time maker at least he was in 1995 according to the 1995 annual edition of Knives, his knives where priced from $80 to some up to $950. back in 1995, he offered engraving and made his own sheaths.
More information and to purchase these knives can be found here
Russell Klingbeil died in January 2004. He was a member of the USMC. An avid surfer and weight lifter. He was an accomplished designer and engineer of fire-sprinkler systems. He was very much into Harley Davidson motorcycles. Remarkably talented at drafting, he was also very good at drawing, often things that would make me laugh and my aunt smack him on the arm. He was an outdoors-man who camped and was an aficionado of the rugged mountain-man lifestyle of yesteryear. He was a black-powder rifleman as well as an accomplished knife-maker.
Here is a Spear Point Boot Knife he made. there were 67 of these made between November 1998 and January 1999. This one is numbered 001.
His knives are sought after by collectors and rarely come on the market.
More photos and information here.
James Buel Lile 1933-1991, known as Jimmy Lile or The Arkansas Knifesmith, was an American knifemaker from Russellville in Pope County, Arkansas, who made the Rambo Knife for the films First Blood and Rambo: First Blood Part II
In 1971, Lile became a full-time knifemaker and was known as “Gentleman Lile” or “The Arkansas Knifemaker”. He was particularly known for his Survival knife designs known as “The Mission” series, created by request for Sylvester Stallone to use in his first two Rambo movies. These designs would go on to influence other knife makers in the 1980s. In addition to creating the Rambo knives, Lile designed and made several Bowie knives that he presented to Governor Bill Clinton and U.S. Presidents Ronald Reagan, Richard Nixon, and Gerald R. Ford, Jr. Other owners of his work included John Wayne, Peter Fonda, Fess Parker, Bo Derek, and Johnny Cash.
When Lile was approached with the specifications for the “Rambo” knife, he was told to design it not as a mere “prop” but as a basic tool to perform a variety of tasks. Lile adapted a basic clip point Bowie knife which could be used to chop wood and slice food while retaining an edge. He employed a waterproof hollow handle design to store matches, needles, thread, and a compass; the hollow-handle allows the knife to be fitted to a pole to make a spear or gig. The handle was wrapped with nylon line that could be used for fishing or making snares. The tips on the guards were made into a standard and Phillips screwdriver and the spine was serrated. Lile chose to forge the blade of 440C high-carbon steel, which he claimed could cut through the fuselage of an aircraft.
Lile was elected president of the Knifemakers Guild in 1978 and was an early member of the American Bladesmith Society. He was elected to the Board of Directors of the ABS in 1977 and acted as a liaison between the two groups. His “Lile Lock” folding knife is on display at the Smithsonian Institution in Washington, D.C. In 1984 he was inducted into the Blade Magazine Cutlery Hall of Fame.
See Lile knives for sale on the website
I’ve added 5 new Desert Damascus knives to the website. These are made exclusively for Sonoran Desert Knives, quality Damascus steel at reasonable prices
Check out the complete collection of Desert Damascus Knives
Picked up a couple of these knives at a show; Elkhorn Knives. They are good quality, custom USA made knives.
These are listed under my fixed blade section on the website,